Exterior facing stone: how does it work?

Exterior facing stone: how does it work?



We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Exterior facing stone: composition and appearance

The exterior facing stone is a plate about 2 cm thick. It completes the finish of a wall or floors. Its imitation of stone offers an ideal decorative solution for your home. Composed of natural stones or reconstituted stones, this coating offers a variety of shapes and colors. Choose the color and shape of your choice according to your taste and style.

The facing plate adapts to your desires indoors and outdoors. Its use is therefore multiple to offer you a unique and original decor. The facing stone is also available in plaster or concrete. Plaster is the most economical and also the lightest solution. Resistant and aesthetic, concrete resists frost and has a wide choice of decorations.

The different types of support and the preparation of the installation

The facing stone has the ability to adapt to any decor. It fits perfectly outside to cover exterior facades. It is an ideal solution if you want to bring cachet to your home.

According to its uses, it offers a decor that is both warm and contemporary. This coating can also be placed on different types of support. Cement, concrete blocks, bricks, concrete or even wood are excellent supports for laying your exterior facing stones

Before laying your facing stones, it is necessary to have a support that is dry, clean and non-friable. Rub the back of the stones with a scraper or a grater to eliminate small surface imperfections and thus ensure better adhesion.

Lay the exterior facing stone


After preparing the wall for the installation of siding, it is necessary to have all the necessary tools. To do this, you will need:

  • cleats
  • special glue for facing stones
  • of the joint (when laying with joints)
  • water repellent treatment
  • a mason's rule
  • one meter
  • a bubble level
  • a notched spatula
  • a mallet
  • a cutting tool: grinder, circular saw or even hand saw

Easy to install, the facing stone is ideal for DIY apprentices ... Outside, installation is done differently than indoor installation. The double glue is put in place using an adhesive mortar or an adhesive cement. The component must of course be suitable for outdoor use.

During laying the facing stone, do not hesitate to alternate the installation of a cut stone and a whole stone in order to reinforce the aesthetic power of this coating.

A decorative solution: you can also work on the offset of the stones to achieve a natural and original effect. For cutting, it is essential to use the right material: the grinder or circular saw for concrete, the handsaw for plaster and finally, the grinder for stone.

The finishes of the facing wall

A few hours after installing the exterior facing stones, it is time to tackle the finishes. This guarantees a bottom line. You must join the stones:

  • Step 1 : Prepare the special seal. You can opt for a tinted or natural lime coating for a more ecological and sustainable solution.
  • 2nd step : Place a little mortar on a plaster. Push the material towards the joint, carefully and smooth it. You can also do this with the piping bag.
  • Step 3: After a few minutes, gently remove the excess using a brush or a brush.
  • Step 4: Outdoors, apply a water repellent treatment to protect your wall from humidity and rain.